M-10 유압 교정 핸드 펌프

MP-V Vacuum Calibration Pump

Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over 4 years and can now be found in over one third of all power plants. Both models "will out perform any manufactured pump in it's category".

PolyXeta Transmitter Series XT-A1-34XXI for Combustible Gases , Zone 1 / 2 - Infrared Sensor

* ArtNr.: XT-A1-34XXI
* Microprocessor based analog gas transmitter with 4 – 2 mA output signal for monitoring the ambient air an detecting flammable gases and vapours in the lower explosion level (LEL) by means of an infrared sensor. The calibration for types without LCD display is possible via the handheld calibration keypad XT.S/CKD. The types with LCD display have a non-intrusive magnetic calibration feature for easy calibration without opening the instrument and declassifying the area.. The gas transmitter is available with EEx-d protection for Ex zone 1 and 2, or with EEx-n protection for Ex zone 2.

S503 정확도 2%RH 0.3℃T /

S503 습도 발생기를 사용하면 습도를 챔버 내부에서 빠르고 정확하게 습도를 발생시켜 습도 센서, 트랜스미터, 휴대용 장비를 테스트 챔버 내에서 안정적으로 검정하거나 교정할 수 있습니다.

DD890 휴대용 디지털 차압계 / -200.0~200mbar

Flow cooler FC500 최소가능온도 -35℃

Microflame welder MFW Series

Fluke 700HTP-2 유압 테스트 펌프

MP-P Pressure Calibration Pump

Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over 4 years and can now be found in over one third of all power plants. Both models "will out perform any manufactured pump in it's category".

IAQ-GARD 휴대용 USB-스틱

* ArtNr.: IAQ-USB
* The mini CO2 air guard by MSR-Electronic provides high air quality in offices and at home. The small USB tool reacts to unpleasent odors and reports minute amounts of toxic hydrocarbon compounds in the air.

노점 교정 시스템 DCS DCS80 -80 ~ 20℃dp
DCS100 -100 ~ 20℃dp

DCS는 노점 센서, 트랜스미터, 기기의 교정, 검증, 특성화용으로 설계된 노점 교정 시스템입니다. DCS 시스템은 완전 자급식 교정 스테이션으로, -100 ~ +20°C의 기준 이슬점 온도 조절이 가능합니다. PC를 통한 교정절차를 자동화하거나 사전에 설정된 이슬점을 수동으로 설정하는 등 DCS를 교정하고자 하는 구간에 맞춤화 하여 사용할 수 있습니다

Oil형 표준저항 RW Series

* Oil식 표준저항,
* Range : 1,10,25,100,1K,10K,100K,1M,10M,100M
* Low temperature coefficient
* Rugged stainless steel construction

MH시리즈용 차압센서

Flow cooler FC200 최소가능온도 -20℃

열전대 자동용접 장비