XZR500 & XCU500

Michell Instruments의 XZR500 산소 분석기는 최고의 연소에 필요한 과잉 공기량을 결정하는 용도로 설계되었습니다. 이것은 Zirconium Oxide 고등 기술을 사용하여 보일러, 소각로, 용광로 같은 혹독한 조건에서 산소량을 측정합니다. 이것은 최악의 조건에서 빠르고 정확한 눈금값을 제공합니다.

상세설명

Sensor Type
Measurement PrincipleZirconium Oxide Sensor with metallic sealed reference and K Type T/C
Performance
Gas requirementsTypical exhaust gas
Measurement Range0.01 to 25% Oxygen
AccuracyBetter than ± 2% of reading
Response Time (T90)20 seconds
Repeatability± 0.1%
Fidelity1% per month
LinearityBetter than ± 1%
Sample Flow RateFlue Gas at 0.5 m/sec minimum rate
Maximum Sample PressureDepending on application
Maximum Sample Temperature1300°C (see probe selection in Wetted Materials)
Outputs
Output SignalOne off 0/4-20 mA linear with Galvanic Insulation Output
2nd optional output
Output LoadOver 1000 Ω
Self-diagnosticsIncluded in readout
Output RangesFreely configured between 0.01 to 25%
Alarms2 Alarms; user adjustable (10 W) 
1 Fault Alarm
Display Resolution0.1% in standard 
(0.01% on request)
Power Supply110 V (100 to 120), 50 - 60 Hz or 220 V (190 to 240) 50 Hz
Power Consumption110 VA
Ambient Temperature Range0 to 55°C
Sensor Temperature700°C
Operating Humidity5 to 90% RH without condensation
Physical
Dimensions300 x 300 x 200mm (Control)
290 x 135 x 650mm (Sensor)
Weight10 to 15kg depending on application
Wetted Materials (Maximum temperature)XZR501 : 304 L Stainless steel (700°C) 
XZR502 : Inconel 600 (1000°C) 
XZR503 : HR160 (600°C to 1000°C) 
XZR504 : C2000 (600°C) 
XZR505 : Halar coating (120°C) 
XZR506 : Ceramic (1300°C)
Probe Lengths0.4, 0.6 and 0.9m
InstallationStack and wall mounting
Housing Ingress ProtectionWeather proof enclosure to sensor: IP53
Control unit: IP52